CREISCENDO
4x4 pick-up · hydraulic hoses
CREISCENDO · hydraulic breakdown service in remote areas

Hydraulic hose workshop pick-up

For the mine, the quarry and the site at the end of the track: a 4x4 pick-up that goes anywhere, uses little fuel and can be serviced in any garage. The hose is remade at the foot of the machine, without sending a truck.

Everything happens at the rear. Open the doors and pull the drawer: it slides out 1.15 m on 500 kg heavy-duty runners, locks, and two legs unfold to take the load to the ground. On the drawer: the PARKER Karrykrimp 2 crimper (up to 1"1/4 two-wire, 60 tonnes), its 12 V electro-hydraulic pump, a small saw and the die case: you crimp standing up, behind the pick-up.

The side flaps lift up: on the left, the shelving with small fitting bins; on the right, the drawer unit, the auxiliary battery and the 230 V inverter. At the front of the canopy, five hose coils on a spindle: the hose is pulled out through the flap.

Ready to drive: everything is secured. The runners and the crimper are bolted to a reinforced false floor, and the drawer locks both closed and open. For a Parkrimp 2 of about 300 kg, the same drawer moves to 700 kg runners and the pick-up to reinforced double leaf springs.

Bull bar, snorkel, all-terrain tyres, strobe light bar and safety flag whip: it enters a mine site as it is. The model below rotates, opens and turns transparent.

CREISCENDO
Drag to rotate · scroll or pinch to zoom
View
Body
Display

PTS — Parker Tracking System

A hydraulic hose always fails at the worst moment, and the costly question is not how to remake it: it is knowing which one to remake. PTS answers that question. Every hose assembled in the workshop gets a label carrying a unique number, applied at assembly and made to last in a hydraulic environment, in the sun and in the dust.

Beyond breakdown repairs, PTS gives you the real hose inventory: how many hoses on which machine, which ones have already been replaced twice, which ones are nearing the end of their service life. That is where preventive maintenance becomes possible. The software is supplied; only the printer, the scanner and the consumables need to be budgeted.

Top view

    CREISCENDO

    Internal body dimensions in millimetres: 2 300 × 1 760 × 1 050. The cab and wheels are shown dotted.

    Equipment

    QtyDescription
    14x4 single-cab pick-up, car licence, bull bar, snorkel, all-terrain tyres, strobe light bar, mining safety flag whip, tow bar
    1Aluminium canopy approx. 2.30 × 1.76 × 1.05 m, side flaps on gas struts, rear doors, LED lighting
    1Sliding drawer on 500 kg heavy-duty runners, 1.15 m travel, locks open and closed, two support legs
    1PARKER Karrykrimp 2 crimper (up to 1"1/4 two-wire, 60 tonnes) and die case
    112 V electro-hydraulic pump on the auxiliary battery
    1Small hose cutting saw
    1Shelving with small fitting bins, retaining bars
    1Drawer unit: adapters, seals, caps, tools
    1Auxiliary battery, coupler, 2 kW 230 V inverter
    5Hose coils on a transverse spindle
    1PTS station on a tablet: label printing
    1Hose Doctor-style livery on the canopy, ParkerStore Hose Doctor logo; customer livery on the doors (fictitious logo)

    We build it to measure

    This layout is a starting point, not a fixed catalogue. We rework it around your machines, your products and your tracks.

    • Parkrimp 2 instead of the Karrykrimp : 700 kg runners and reinforced rear suspension.
    • Double cab to carry two technicians and their tools.
    • Compact generator set if large-diameter hoses require it.
    • Starter stock chosen from the site’s machines.
    • Paint and livery in your network’s colours.

    Tell us which machines you service and where the vehicle has to work: we come back with a layout and a price.
    Samuel Creiche · CREISCENDO · creiscendo@creiscendo.com · +33 6 76 18 78 74

    © CREISCENDO 2026 · 11 rue Nationale, 37150 Chisseaux, France · creiscendo@creiscendo.com · +33 6 76 18 78 74 · en.creiscendo.com