CREISCENDO
40 ft container · heated bitumen storage
CREISCENDO · containerised site equipment

Heated bitumen storage container, 40 ft

Bitumen cannot be stored cold. A tank of about 40 m³ insulated over its whole surface, controlled heating that keeps the product at pumping temperature without ever overheating it, and an unloading unit with a heated gear pump that sends it to the asphalt plant. All of it inside a 40 ft ISO container, which travels by sea and sits on site with no civil works.

Designed for life after delivery. The tank rests on saddles welded to the chassis, the whole unit sits in a bund covering the full footprint, and the unloading and loading connections remain accessible with the doors closed. The manhole, the level gauge and the temperature probes are reached from a fixed ladder.

The model below reproduces a real unit: layout, colours and equipment dimensions taken from photographs. Rotate it, close the doors, make the walls transparent.

CREISCENDO
Drag to rotate · scroll or pinch to zoom
View
Walls
Openings

Top plan

  • Insulated tank
  • Bund
  • Unloading pump unit
  • Control cabinet
CREISCENDO

Internal dimensions in millimetres. Standard 40 ft container: 12,030 × 2,350 × 2,390 mm inside. The doors are on the left of the plan.

Equipment

QtyDescription
140 ft ISO container, structure reinforced for the full-tank load, end doors
1Steel bitumen storage tank, insulated, about 40 m³, dished ends, saddles welded to the chassis
1100 mm rock wool insulation under aluminium cladding, over the whole shell and both ends
1Tank heating, thermostatically controlled, keeps the bitumen at pumping temperature
1Bund under the full tank footprint, with drain point
1Unloading unit: bitumen gear pump with heated casing, on a skid
3Plug valves with heating jacket — suction, delivery, bottom drain
2Unloading and loading connections, capped, accessible with the doors closed
1Control cabinet: temperature control, pump start-stop, safety devices, remote alarm
2Temperature probes, tank and delivery line
1Level gauge with readout on the cabinet front
1Manhole on top, access ladder and folding guardrail
1Breather vent and degassing device
4LED light bars, weatherproof sockets, cable tray

Bitumen is stored hot: the whole point is to hold the temperature without ever overheating the product, which ages if it is cooked. The heating is therefore controlled and the tank is insulated over its whole surface, ends included — the ends are where the heat escapes when they are neglected.

We build it to your requirements

Tank volume, heating power and heating method, and whether an unloading unit is needed, are all set from your asphalt production rate and the distance to your plant.

  • Volume from 20 to 60 m³ depending on your consumption and how often you are resupplied.
  • Heating of your choice: immersed electric heaters, thermal oil circulation or a burner, depending on the energy available on site.
  • On-board generator for a site with no mains supply, sized on the heating power.
  • Twin tank in the same container, to hold two grades side by side.
  • Heated unloading line and trace-heated hoses up to the asphalt plant.
  • Weighing and metering of the bitumen drawn off, with readout on the cabinet.
  • Paint in your colours and your logos applied on the container.
  • Delivered to your site, in West and Central Africa as well as in Europe.

Tell us the volume, the bitumen grade and where the container needs to go: we will come back with a layout and a price.
Samuel Creiche · CREISCENDO · creiscendo@creiscendo.com · +33 6 76 18 78 74

© CREISCENDO 2026 · 11 rue Nationale, 37150 Chisseaux, France · creiscendo@creiscendo.com · +33 6 76 18 78 74 · en.creiscendo.com