For the town, the industrial area and the port: a 3.5-tonne van that parks anywhere and is driven on a car licence. The hose is remade at the foot of the machine while the driver waits.
The PARKER Parkrimp 2 crimper and the saw sit side by side on the right-hand bench, facing the side door: you cut and crimp standing up, outside, with the machines at bench height. The PTS station is on the wall at the end of the bench; the fittings are stored in small bins by standard, on the left. At the rear, the dispenser holds the hose coils: the hose is pulled out through the rear doors. Below, a silent generator and a small compressor.
Less room than in the truck: no rotating-tray rack and no two-metre trough. It keeps the essentials for the most common hoses, and the PTS station fits on a wall shelf.
Ready to drive: everything is secured. Furniture screwed to the floor and walls, locking drawers, bins held by bars.
The model below rotates, opens and turns transparent.
A hydraulic hose always fails at the worst moment, and the costly question is not how to remake it: it is knowing which one to remake. PTS answers that question. Every hose assembled in the workshop gets a label carrying a unique number, applied at assembly and made to last in a hydraulic environment, in the sun and in the dust.
Beyond breakdown repairs, PTS gives you the real hose inventory: how many hoses on which machine, which ones have already been replaced twice, which ones are nearing the end of their service life. That is where preventive maintenance becomes possible. The software is supplied; only the printer, the scanner and the consumables need to be budgeted.
Internal body dimensions in millimetres: 3 700 × 1 780 × 2 100. The cab and wheels are shown dotted.
| Qty | Description |
|---|---|
| 1 | 3.5 t van with extra-high roof, car licence, medium length: approx. 3.70 × 1.78 × 2.10 m usable (extra-high roof) |
| 1 | Non-slip plywood floor, wall lining, cab bulkhead, LED lighting, roof strobe light |
| 1 | PARKER Parkrimp 2 crimper facing the side door, die tray under the bench |
| 1 | Hose cutting saw at the end of the bench |
| 1 | Steel bench with wooden top, approx. 1.90 m |
| 6 | Bays of small bins for the fittings, one per standard |
| 1 | Transverse five-coil dispenser, reached through the rear doors |
| 1 | Silent 230 V generator, electrical panel, sockets |
| 1 | 24 l compressor and blow gun |
| 1 | Drawer cabinet for adapters, seals and caps |
| 1 | 6-drawer tool trolley, power tools |
| 1 | PTS station: tablet, Zebra label printer, scanner |
| 1 | Hose Doctor-style livery: yellow, grey and black wave at the rear, drawn hose, ParkerStore Hose Doctor logo on the sides; customer livery on the doors (fictitious logo) |
This layout is a starting point, not a fixed catalogue. We rework it around your machines, your products and your tracks.
Tell us which machines you service and where the vehicle has to work: we come back with a layout and a price.
Samuel Creiche · CREISCENDO · creiscendo@creiscendo.com · +33 6 76 18 78 74
© CREISCENDO 2026 · 11 rue Nationale, 37150 Chisseaux, France · creiscendo@creiscendo.com · +33 6 76 18 78 74 · en.creiscendo.com