Test where the samples are taken: soil and aggregate testing on a road or dam project, sample preparation at a mine, quality control at a concrete batching plant. The container arrives equipped, air-conditioned and lit; set it down, connect power and water, and the laboratory is working the same day.
At the entrance, an airlock with two clothes lockers keeps the outside dust away from the laboratory. On the left, a ventilated fume hood exhausts fumes through the outer wall via its extractor fan, followed by the sink bench with its water heater. On the right, a 4.5 m continuous lab bench runs beneath two windows, with the air conditioner between them. The windows have bars and a roller shutter.
Ready to travel: everything is secured. Lab benches, fume hood and lockers are bolted to the floor and walls; the water heater, extractor fan and air conditioner are held by their brackets, the strip lights by the ceiling. Nothing moves during transport and handling.
The model below is of an actual build: colours, dimensions and equipment positions. Rotate it, step inside, make the walls transparent: everything can be changed, and we adapt the layout to your tests.
Internal dimensions in millimetres. Standard 20-foot container: 5,900 × 2,350 × 2,390 mm inside, 6,058 × 2,438 × 2,591 mm outside. Worktops 900 mm above the floor, 1,000 × 900 mm windows, sills at 1,150 mm.
| Qty | Description |
|---|---|
| 1 | 20-foot container painted white, insulated and lined with white panels, grey wood-effect vinyl plank flooring |
| 1 | 900 × 2,000 mm service door at the end, with low ventilation grille and lock |
| 1 | Entrance airlock: partition and 800 × 2,000 mm inner door |
| 2 | Steel clothes lockers, blue louvred doors, 400 × 500 × 1,800 mm |
| 1 | 1,200 mm laboratory fume hood: sash window with red handle, stainless worktop, base cabinet, controls and three sockets on the side post |
| 1 | Wall-mounted centrifugal extractor fan with galvanised duct and exhaust grille in the outer wall |
| 1 | 4,560 × 700 mm continuous lab bench: grey laminate top, white base units with doors and drawers, stainless bar handles |
| 1 | 2,680 × 620 mm sink bench with single-bowl stainless sink and mixer tap, plus a base unit under the extractor fan |
| 1 | Vertical electric water heater of about 100 L on a bracket, above the sink bench |
| 3 | White PVC sliding windows, 1,000 × 900 mm, galvanised bars and roller shutter |
| 1 | Wall-mounted split air conditioner between the two windows |
| 3 | Ceiling LED strip lights, two in the laboratory and one in the airlock |
| 4 | Grey waterproof socket blocks, two- and three-gang, above the worktops |
| 2 | High ventilation grilles, at the back and in the outer wall |
| 1 | Electrical panel in the airlock |
850 mm aisle between the fume hood and the long lab bench: two people can pass each other comfortably, and the fume hood sash stays clear.
Nothing shown here is fixed. The number of lab benches, which side the fume hood is on, where the sink goes: everything is reworked around your tests.
Tell us what you want to use it for and where the container needs to go: we will come back with a layout and a price.
Samuel Creiche · CREISCENDO · creiscendo@creiscendo.com · +33 6 76 18 78 74
© CREISCENDO 2026 · 11 rue Nationale, 37150 Chisseaux, France · creiscendo@creiscendo.com · +33 6 76 18 78 74 · en.creiscendo.com