CREISCENDO
20-foot workshop container · lubricant distribution
CREISCENDO · containerised site workshop

20-foot lubrication workshop container

Dispense six lubricants on site, with no buried tank and no building to put up. Each drum has its own air-operated pump, hose reel and dispensing gun; the drums in service sit behind a lift-up flap that doubles as an awning, the full drums wait opposite, and an aisle runs between the two. The container is set down, plugged in and moves with the site.

Ready to travel: everything is secured. Shelving, pumps and hose reels are bolted to the floor, walls or ceiling; drums are strapped in their containment tray. Nothing moves during transport and handling.

The model below is of an actual build. Rotate it, open the flap, make the walls transparent: everything can be changed, and we adapt the layout to what you store.

CREISCENDO
Drag to rotate · scroll or pinch to zoom
View
Walls
Openings

Top plan

    CREISCENDO

    Internal dimensions in millimetres. Standard 20-foot container: 5,900 × 2,350 × 2,390 mm inside, 6,058 × 2,438 × 2,591 mm outside.

    Equipment

    QtyDescription
    120-foot container, preferably one-trip, with a lift-up flap cut into the right-hand wall
    6Premium air-operated pumps: 5 for oil and coolant, 1 for grease
    6Standard-length hose reels, mounted above the flap
    6Guns: 5 metered dispensing guns for the fluids, 1 grease gun
    2Spill containment trays, 4,500 × 700 × 250 mm, with grating, about 790 L each
    1Compressed-air network: external inlet coupling, ceiling manifold and one drop with filter-regulator per pump. No compressor.
    1Weatherproof (IP) industrial inlet socket for the site generator, and an electrical panel
    2LED ceiling light fittings
    1Ceiling electrical cable tray, on the full-drum side: all power runs inside it, nothing hangs down
    1Cable tray for the air hoses, on the pump side: it carries the manifold and the drops to each pump
    2220 V power sockets

    Containment: 6 drums of 220 L make 1,320 L. The usual rule requires retaining at least half of the stored volume, i.e. 660 L. A 250 mm-deep tray holds 790 L.

    We build it to your requirements

    Nothing shown here is fixed. The number of fluids, the drum size, the flap side, the hose reel length: everything is reworked around the way you operate.

    • Built-in compressor. The container shown here connects to the site air supply. If you have none, we install a compressor inside and the container becomes self-contained.
    • Air conditioning. In hot climates, for operator comfort and to keep the oils at temperature.
    • Number and type of fluids. From two to eight drums, grease in kegs or drums, AdBlue, diesel.
    • Meters and records. Metered dispensing guns, totalisers, consumption tracking per machine.
    • Insulation, cladding, paint in your colours and your logos applied on the doors.
    • New one-trip or used container, 10, 20 or 40 feet, side opening or doors only.
    • Delivered to your site, in West and Central Africa as well as in Europe.

    Tell us what you store and where the container needs to go: we will come back with a layout and a price.
    Samuel Creiche · CREISCENDO · creiscendo@creiscendo.com · +33 6 76 18 78 74

    © CREISCENDO 2026 · 11 rue Nationale, 37150 Chisseaux, France · creiscendo@creiscendo.com · +33 6 76 18 78 74 · en.creiscendo.com