Charge the electric vehicles and machines of a mine, a quarry or a base camp without building a plant room. The 8-foot container protects the fast charging station from dust, rain, sun and theft; it sits on levelled ground, connects to the grid or the site power plant, and moves with the site by forklift.
The charging station fits in two stainless-steel cabinets side by side, facing the original doors: the power module on the left, fully louvred, and the control unit on the right, with its screen, badge reader and emergency stop. The cabinets sit on a galvanised frame mounted on rails, so they can be pulled out for maintenance. Each door carries a charging cable coiled on its holder; two side doors give access to the rear of the cabinets, protected by a mesh guard.
Ready to travel: everything is secured. The cabinet frame is bolted to the floor and locked on its rails, the cable holders and the mesh guard are screwed to the doors and walls, and the centre post locks the doors. Nothing moves during transport and handling.
The model below is of an actual build: colours, dimensions and positions. Rotate it, open the doors, make the walls transparent: everything can be changed, and we adapt the layout to your charging station.
Internal dimensions in millimetres. 8-foot container: about 2,438 × 2,200 × 2,260 mm overall, 2,280 × 2,040 × 2,100 mm inside. Service doors 920 × 1,950 mm.
| Qty | Description |
|---|---|
| 1 | 8-foot container with its original end doors, painted white outside and grey inside, galvanised steel floor |
| 2 | Side service doors, 920 × 1,950 mm, one on each side, with lock |
| 1 | Fast charging station in two stainless-steel and aluminium cabinets of about 620 × 800 × 1,600 mm: louvred power module, control unit with screen, indicator lights, badge reader and emergency stop |
| 1 | Galvanised frame on two rails, to pull the cabinets out for maintenance |
| 2 | Charging cables with connector, coiled on a half-moon holder inside each door |
| 2 | White mesh panels on the walls, from the service door to the back |
| 4 | Ventilation grilles: two high in the back wall, two low in the doors |
| 2 | Sign plates screwed to the long sides, bearing the logo |
| 1 | Hazard marking: black-and-white tape on the long sides, red-and-white on the corner posts |
| 1 | Removable centre post between the original doors |
About 760 mm remains behind the cabinets and 720 mm in front: the control unit can be opened and the rear worked on without taking anything out.
Nothing shown here is fixed. The charging station’s power, the number of charging points, the cable length: everything is reworked around your fleet.
Tell us what you want to use it for and where the container needs to go: we will come back with a layout and a price.
Samuel Creiche · CREISCENDO · creiscendo@creiscendo.com · +33 6 76 18 78 74
© CREISCENDO 2026 · 11 rue Nationale, 37150 Chisseaux, France · creiscendo@creiscendo.com · +33 6 76 18 78 74 · en.creiscendo.com