CREISCENDO
40-foot workshop container · hydraulic hoses
CREISCENDO · containerised site workshop

40-foot hydraulic hose workshop container

The same workshop in forty feet: twice the length, so room for a proper testing station as well. A 9.75-metre continuous bench runs along one wall, from the crimper to the rotating-tray rack; the saw is at the far end, against the rack, and the hose is unrolled along a tape measure whose zero is on the blade. Opposite: the fittings, a bulk hose dispenser, space for the welder and the wheeled compressor, and at the back the test bench.

At the entrance, a clear area with waste bins, broom, fire extinguisher and first-aid kit; the crimping chart is posted on the inside of the door. The container connects to the site mains or to a generator through its external three-phase 400 V 32 A socket. Its long sides carry the customer’s livery: on the model, an example livery with a fictitious company and logo.

Ready to travel: everything is secured. Benches, shelving and equipment are bolted to the floor, walls or ceiling; the crimper is screwed to the bench and bins are held on the shelves by retaining bars or straps; the wheeled welder and compressor are strapped to the wall. Nothing moves during transport and handling.

PARKER fittings are one-piece: the ferrule is pre-crimped onto the fitting. With No-Skive technology there is no need to skive the hose, so no skiving machine is needed — saving time and equipment. They are stored by standard, one bay each: ORFS, JIC, DIN, BSP, NPT and SAE flanges.

This is the format for site camps and equipment fleets that no longer want to depend on a subcontractor. The model below is of an actual build: rotate it, open the doors, make the walls transparent.

CREISCENDO
Drag to rotate · scroll or pinch to zoom
View
Walls
Display

PTS — Parker Tracking System

A hydraulic hose always fails at the worst moment, and the costly question is not how to remake it: it is knowing which one to remake. PTS answers that question. Every hose assembled in the container gets a label carrying a unique number, applied at assembly and made to last in a hydraulic environment, in the sun and in the dust.

Beyond breakdown repairs, PTS gives you the real hose inventory: how many hoses on which machine, which ones have already been replaced twice, which ones are nearing the end of their service life. That is where preventive maintenance becomes possible. The software is supplied; only the printer, the scanner and the consumables need to be budgeted.

Top plan

    CREISCENDO

    Internal dimensions in millimetres. Standard 40-foot container: 12,030 × 2,350 × 2,390 mm inside, 12,192 × 2,438 × 2,591 mm outside. One-metre clear entrance on the shelving side; on the bench side, 1,050 mm clear between the door and the crimper, electrical panel kept clear. Clear aisle of 1,100 to 1,230 mm along the shelving, narrowing to 880 mm between the test bench and the V-trough. The tape measure starts at the blade (0) and increases towards the doors.

    Equipment

    QtyDescription
    140-foot container, preferably one-trip, tread-plate floor and welded fixing plates
    1Insulation: thin sprayed cork, or 30 mm sandwich panels where the climate calls for it
    1PARKER Parkrimp 2 crimper (83CE-083U): horizontal power unit, vertical motor, tilted head under a yellow guard, at the very end of the bench by the door, with one metre clear in front of it for crimping
    1Die sets: holder next to the crimper and tray under the bench
    1Hose cutting saw, at the end of the bench, against the rotating-tray rack
    1Fume extractor, 1,000 m³/h: fan on a stainless-steel bracket, black arm and hood above the saw
    1Wall-mounted compressed-air hose reel with blow gun
    1Test bench, in a closed cabinet with viewing window and pressure gauges, at the back, on the side opposite the bench
    1Continuous steel assembly bench with wooden top, 600 kg rated, about 9.75 m long, from the crimper to the rotating-tray rack; it stops one metre short of the door, leaving room to crimp and keeping the electrical panel clear
    1Pillar drill, in the middle of the bench
    1V-trough along the front edge of the bench, tape measure with its zero on the saw blade: unroll the hose in the trough to the required length, mark, cut
    1125 mm bench vice, fixed to the bench between the PTS station and the pillar drill
    1Power tools: angle grinder, cordless drill, batteries and charger, stored under the bench on the lower shelf
    1PTS station: laptop, Zebra label printer and barcode scanner
    17-tray rotating rack for the hose coils, in the back corner
    1Bulk hose dispenser, two levels, four coils of about 1.1 m
    6Bin shelving bays for fittings, one per standard (ORFS, JIC, DIN, BSP, NPT, SAE flanges), labelled bins
    1ParkerStore workshop stool
    1Wheeled compressor, 160 l/min at 8 bar, stored in the container and taken out onto the site
    1Wheeled welder, with its gas cylinder
    1Customer livery on the long sides (example on the model, fictitious logo) and ParkerStore Onsite Solutions logo
    1Clear entrance area: 100 l waste bin, oily-waste bin, broom, brush and dustpan on a wall bracket
    1Wall-mounted fire extinguisher with signage, first-aid kit
    1PARKER crimping chart (die selection by fitting and hose series), posted on the door
    1Hose internal cleaning station, used before crimping
    1Complete electrics: external 400 V supply through a Hypra 32 A socket in an enclosure, panel, 220 V sockets, LED light fittings
    2Ceiling cable trays: electrics on one side, compressed-air network on the other

      We build it to your requirements

      This container is a starting point, not a closed catalogue. The layout is reworked around your machines, your hoses and the space you have.

      • Compressor or not. This one has a wheeled unit, stored next to the welder. If your site already has an air network, we remove it and connect to yours.
      • Choice of insulation. Sprayed cork, which takes up little space, or 30 mm sandwich panels when heat really has to be kept out.
      • Air conditioning, for working in hot climates.
      • On-board generator if the site has no power.
      • Starter stock: hoses, fittings and adapters, selected for the equipment fleet you operate.
      • Marking, inspection lamp and further test equipment, to be added depending on the workshop level you are aiming for.
      • New one-trip or used container, 10, 20 or 40 feet, doors only or side opening.
      • Paint in your colours and your logos applied.
      • Delivered to your site, in West and Central Africa as well as in Europe.

      Tell us which machines you maintain and where the container needs to go: we will come back with a layout and a price.
      Samuel Creiche · CREISCENDO · creiscendo@creiscendo.com · +33 6 76 18 78 74

      © CREISCENDO 2026 · 11 rue Nationale, 37150 Chisseaux, France · creiscendo@creiscendo.com · +33 6 76 18 78 74 · en.creiscendo.com