CREISCENDO
4x4 workshop truck · servicing and lubrication
CREISCENDO · all-terrain mobile workshop

4x4 maintenance workshop truck

The service comes to the machine, not the other way round. This 4x4 truck carries everything needed for a complete oil change at the foot of the machine, in a quarry or at the end of a site track: new oils, used-oil recovery, grease, compressed air, pressurised water and electricity.

The deck is closed by sealed aluminium roller shutters on both sides and at the rear: they keep the dust out and lift in one movement. On the right, four 600-litre tanks on a drip tray: engine oil, transmission oil, coolant, and the used-oil tank with its two-way diaphragm pump, which sucks and delivers. On the left, the 1,000-litre water tank and its pressure washer, the grease drum and its pump, the diesel screw compressor. At the rear, six reels with gun and volumetric meter: pull the hose to the machine, dispense, read the quantity.

The carrier is a 19-tonne 4x4 with raised ground clearance, single all-terrain tyres and a raised air intake: it handles ruts, broken tracks and fords. A power take-off drives the hydraulic pump, which runs the 6 kVA generator and the pressure washer: no second engine to maintain.

Ready to drive: everything is secured. Tanks, compressor, reels and lockers are bolted to the deck or the chassis and strapped down; nothing moves on the track. The underbody lockers hold the tool chest, the lifting gear and the drain equipment.

The model below is a working basis: rotate it, raise or lower the shutters, make the body transparent.

CREISCENDO
Drag to rotate · scroll or pinch to zoom
View
Body
Display

Top view

    CREISCENDO

    Internal body dimensions in millimetres: 5 000 × 2 400 × 2 000. The cab and wheels are shown dotted.

    Equipment

    QtyDescription
    14x4 carrier, GVW 19 t, Tier 3 / Euro 3 engine, raised ground clearance, single all-terrain tyres, front and rear anti-roll bars
    1Air-conditioned cab, radio, two beacons, reversing alarm, reflective strips all round, warning triangle, fire extinguisher, spare wheel, 1,000 h service kit, RAL 9010
    1Power take-off and hydraulic pump, diesel tank with anti-siphon, underrun bar
    1Deck closed by sealed aluminium roller shutters on both sides and at the rear, rigid roof, LED lighting, chequer-plate floor
    4600 l tanks with level gauge: engine oil, transmission oil, coolant, used oil
    1Accessible drip tray under the four tanks
    1High-flow two-way diaphragm pump (suction and delivery) on the used-oil tank
    1High-flow pump for filling the tanks
    6Reels with gun and mechanical volumetric meter: engine oil, transmission, coolant, grease, compressed air, high-pressure water
    11,000 l water tank connected to the pressure washer
    1Pressure washer driven by a hydraulic motor, protection filter, 20 m hose on reel
    1Space for a grease drum with pump kit
    1Diesel screw air compressor, 7 bar, 2 m³/min, fixed to the deck; air reel with quick coupler, tyre inflator and blow gun
    16 kVA generator driven by the truck’s hydraulic circuit
    3Underbody lockers: 6-drawer tool chest, straps and lifting gear, drain pan and absorbent
    1Small bench with vice

    We build it to measure

    This layout is a starting point, not a fixed catalogue. We rework it around your machines, your products and your tracks.

    • Carrier of your choice. 4x4 or 6x6, single or twin tyres, depending on the tracks and the payload.
    • Tanks to your list. From 400 to 1,000 l, stainless or steel, as many products as oil grades in your fleet.
    • Diesel as well. A diesel tank and refuelling pump, to serve the machines on the same round.
    • Work lighting and a lighting mast for night servicing.
    • Paint in your colours and your logos.
    • Delivered to your site, in West and Central Africa as well as in Europe.

    Tell us which machines you service and where the vehicle has to work: we come back with a layout and a price.
    Samuel Creiche · CREISCENDO · creiscendo@creiscendo.com · +33 6 76 18 78 74

    © CREISCENDO 2026 · 11 rue Nationale, 37150 Chisseaux, France · creiscendo@creiscendo.com · +33 6 76 18 78 74 · en.creiscendo.com