CREISCENDO
4.80 m module · oil storage and dispensing, compressed air
CREISCENDO · containerised lubrication station

Oil and compressed-air container, 4.80 m module

A complete lubrication station in a module shorter than a 20-footer, set down as close as possible to the machines on a mine or a site. New oils are stored in bulk in three compartmented stainless-steel tanks, each with its air-operated pump; the hoses rise to the ceiling, run along a cable tray and come back down to a rack of seven hose reels just behind the shutter. The operator pulls out the nozzle and the flow meter shows what has been dispensed.

The module produces its own air: a compressor and its electrical cabinet are installed inside, against the left-hand wall. A 220 L grease drum with its pump waits on a retention tray at the entrance; a wall-mounted diaphragm pump recovers the used oil; a bench with drawers serves as a workstation. The roller shutter opens across the full width and two LED floodlights light the service area at night.

Ready to travel: everything is secured. Tanks, rack, compressor, cabinet and bench are bolted to the floor or the walls; the hose reels are screwed to their rack or to the ceiling and the drum is strapped to its tray. Nothing moves during transport and handling.

The model below is of an actual build, as close as possible to the photos: equipment colours, dimensions and positions. Rotate it, close the shutter, make the walls transparent.

CREISCENDO
Drag to rotate · scroll or pinch to zoom
View
Walls
Openings

Top plan

    CREISCENDO

    Internal dimensions in millimetres. Module 4,800 × 2,438 × 2,591 mm outside, 4,640 × 2,330 × 2,390 mm inside. Roller shutter at the entrance across the full usable width.

    Equipment

    QtyDescription
    14.80 m container module, white, with galvanised roller shutter at the entrance (opening 2,230 × 2,120 mm) and high-level vents
    1Stainless-steel tank on the return wall, 3 compartments, 1,170 × 1,030 × 1,050 mm, about 400 L per compartment
    1Stainless-steel tank against the back wall, 2 compartments, 1,220 × 630 × 1,050 mm
    1Stainless-steel tank along the left-hand wall, 1,050 × 620 × 1,120 mm
    6White air-operated piston pumps, one per product, with level indicators on each compartment
    1Black steel rack 560 × 800 × 1,560 mm, with drip tray at the base
    7Yellow-arm hose reels on the rack: 3 on top, 3 on the middle level, 1 at the bottom for grease
    3Metered nozzles with digital display, and plain nozzles on the other lines
    3Ceiling hose reels near the entrance, including one for compressed air (red hose)
    1Red air compressor with horizontal tank
    1Red electrical cabinet on a black frame, with battery and heater
    1Blue 220 L grease drum, black lid and air-operated pump, on a yellow 1,000 × 800 mm retention tray
    1Air-operated diaphragm pump on a wall bracket, for used oil, with suction hose
    1Bench 1,100 × 600 mm, two grey drawers, anthracite perforated sides, wooden top
    2Wire-mesh ceiling cable trays: product hoses (black) and air network (red)
    3Weatherproof LED light fittings inside, and 2 LED floodlights above the shutter

    The oils are stored in bulk in the stainless-steel tanks, not in drums: less handling, no empty drums to dispose of, and filling by tanker truck or by transfer from IBCs.

    We build it to your requirements

    Nothing shown here is fixed. Number of products, tank volumes, number of hose reels, module length: everything is reworked around the way you work.

    • General retention bund under the tanks, with grating, if your site requires it.
    • Air conditioning in hot climates, for the operator and to keep the oils at temperature.
    • Meters and records: consumption tracking per machine and per product.
    • Used-oil tank opposite the diaphragm pump, with level indicator.
    • Insulation, cladding, paint in your colours and your logos applied on the doors and walls.
    • New one-trip or used container, short module, 10, 20 or 40 feet.
    • Delivered to your site, in West and Central Africa as well as in Europe.

    Tell us what you store and where the container needs to go: we will come back with a layout and a price.
    Samuel Creiche · CREISCENDO · creiscendo@creiscendo.com · +33 6 76 18 78 74

    © CREISCENDO 2026 · 11 rue Nationale, 37150 Chisseaux, France · creiscendo@creiscendo.com · +33 6 76 18 78 74 · en.creiscendo.com